ADJ Dotz Par RGBL 16x 3.5-Watt C.O.B. LED Fixture

Introducing ADJ Dotz Par RGBL 16x 3.5-Watt C.O.B. LED Fixture: A Revolution in Lighting Design
The Dotz Par RBGL is a game-changer for lighting designers, offering a brilliant, evenly-distributed wash of light that uses highly efficient Chip On Board (C.O.B.) technology. This innovative system employs red, green, blue, and lime LED chips, resulting in a high CRI output, advanced color mixing, and linear color temperature (ranging from 2700K to 6500K) with built-in preset color temperatures.

With 16-Bit fine color control and 64 built-in color macros, the Dotz Par RGBL is versatile and easy to use. It boasts a beam output of 35-degrees and a small, lightweight design that makes it perfect for temporary event production or installation at small stages, churches, nightclubs, or any venue where entertainment lighting is needed.

The Dotz Par RGBL offers six operational modes, six dimmer curve modes, and four selectable dim curves, and supports DMX and RDM protocols. Additionally, its locking power in and out sockets allow for easy daisy-chaining, while the 3-pin DMX in/out sockets make for simple connectivity.

With its supplied scissor yoke, the Dotz Par RGBL is incredibly versatile and can be hung in the air or set on the ground, making it an indispensable tool for lighting designers everywhere.

Key Features

• The Dotz Par RBGL is a lighting fixture that provides lighting designers with a brilliant and even wash of light.
• It utilizes the highly efficient Chip On Board (C.O.B.) technology, which includes red, green, blue, and lime LED chips.
• The addition of lime allows the Dotz Par RGBL to offer a high CRI output and advanced color mixing capabilities.
• It also features linear color temperature control, allowing for a range of color temperatures from 2700K to 6500K.
• The fixture comes with built-in preset color temperatures for convenience.
• With 16-Bit fine color control, users have precise control over the red, green, blue, and lime colors.
• There are 64 built-in color macros available for easy selection of different color combinations.
• The Dotz Par RBGL has a beam output of 35-degrees, providing a wide coverage area.
• The light source consists of 16x 3.5-Watt RGBL C.O.B. LED, with 4x red, 4x green, 4x blue, and 4x lime chips.
• The fixture has a 20,000-hour rated life and produces 1250 lumens of light.

Technical Specifications

SOURCE
Light Source
16x 3.5-Watt RGBL C.O.B. LED (4x Red, 4x Green, 4x Blue & 4x Lime)
20,000 Hours Rated Life
PHOTOMETRIC DATA
Lumens
1250
EFFECTS
35° Beam Angle
Linear Color Temperature Control (2700K to 6500K)
Preset Color Temperatures
16-Bit Fine Color Control (Red, Green, Blue & Lime)
64 built-in Color Macros
CONTROL
4-button, DMX digital display on rear panel
6 Operational modes
Static Color Mode, RGBL Dimmer Mode, Program Mode, Sound Active Mode, Wireless RF and DMX Controlled
Supports RDM (Remote Device Management)
With Wired Digital Communication Network
6 selectable Dimming Modes (Standard, Stage, TV, Architectural, Theatre & Stage 2)
4 selectable Dim Curves (Linear, Square Inv. Squa, S-Curve)
1200Hz LED Refresh Rate
LED pulse and strobe effect
Electronic Dimming
0 - 100%
CONSTRUCTION / CONNECTIONS
Plastic construction
IEC Locking, In/Out Power connectors
Indoor 3-pin, XLR DMX, In/Out sockets
Scissor Yoke
ELECTRICAL / THERMAL
Multi-voltage operation
AC 100-240V, 50/60Hz
Max Power Link
30 @120V., 57 @230V.
Max power consumption
36W
Fuse protected
T1A/250V (5*20mm)
DIMENSIONS / WEIGHT
Length
5.19” (131.8mm)
Width
8.23” (209mm)
Height
8.72” (221.44mm)
Weight
4.41lbs. / 2kg.
APPROVALS / RATINGS
CE
ETL
CSA
IP20
INCLUDED ACCESSORIES
(1) Power Cord
(1) Lens Kit