Barix M400 IP Paging Gateway

Barix M400 IP Paging Gateway

Bridges Smartphones, Computer and Tablet with Analog and IP Paging Systems.
The Barix Paging Gateway allows to page from mobile phones and from any computer or tablet on the local network. It easily integrates with most existing analog paging systems. The web app provides a simple to use interface that allows paging into any paging system, even fully analog ones (no application needs to be installed). Access protection makes sure, only persons allowed to page, can use the system. The Paging Gateway can also be used as a zone-based paging station. The user selects the zones he/she wants to page to and the fully IP based IC paging solution routes the paging to the right speakers or zone amplifiers.

Key Features

• Embedded Linux based on Yocto
• Barix IPAM400 Processor Module
• Quad-Core ARM Cortex -A7
• 2GB DDR3 SDRAM
• 16MB SPI Flash
• 8GB SD-Card Flash

Technical Specifications

OPERATION SYSTEM
Embedded Linux based on Yocto
NETWORK INTERFACES
1 x Ethernet (RJ45) Interface
IPv4, IPv6 capable
10/100 fdx/hdx, auto negotiation
TCP/IP, UDP, RTP, SRTP SIP, SIPS, HTTP, HTTPS, DHCP, mDNS/DNS-SD (Avahi), NTP
BARP
CPU / MEMORY
Barix IPAM400 Processor Module
Quad-Core ARM Cortex -A7
2GB DDR3 SDRAM
16MB SPI Flash
8GB SD-Card Flash
AUDIO FORMATS
G.711 (uLaw/aLaw), 8kHz and 24kHz
AUDIO INTERFACE
unbalanced L-R Line level output on RCA connectors
Headphone connector on the front panel
USER INTERFACE
Mobile Paging Web App
Web interface for configuration
2 x Multicolor LED Status indicators
Reset & Factory Defaults Button
POWER REQUIREMENTS
5VDC, 10W maximum on 6.5x1.5mm barrel connector (positive polarity)
MTBF
> 200’000h
MEASUREMENT
108x38x78.7mm (4.25x1.5x3.1 inch
WEIGHT
250g
WARRANTY
Two years