Clear-Com CZ-BP410 BP410 Beltpack

Clear-Com CZ-BP410 BP410 Beltpack

The BP410 is a rugged, light-weight, ergonomically designed beltback to be used with the BS410 base station. Single-channel operation allows any four beltpack and/or all-in-one wireless headset uses to engage in simultaneous, full-duplex communication. In dual-channel operation, three users may be in full-duplex with up to 13 additional users in listen-only mode. The BP410 has a rugged, over-mold, reinforced casing and long-lasting keypads with no mechanical switch. Using the BAT50 Li-Ion battery, the BP410 has up to 12 hours of battery life.

Key Features

• Two-channel
• 7kHz wideband audio
• Up to 15 beltpacks and/or all-in-one handsets on a single system
• Single or dual-channel operation
• Up to 12 hours of battery life

Technical Specifications

Audio
Channels: 2 audio channels
Frequency Range: 2400 MHz - 2483.5 MHz
Frequency Response: 200 Hz - 7 kHz
Antenna: Internal, horizontal/vertical diversity
Headset Connector: 4-pin, mini-DIN
Microphone: Electret
Headset Output: 160mW into 32 Ohms
System Distortion: <2%
Controls: Power, Volume-Up, Volume-Down, A, B, ISO
Indicators: Dual-color LED (red/green)
Battery Requirements: 3.6V lithium-ion
Battery Life: Up to 12 hours
Antenna
Internal, Horizontal/Vertical diversity
Transmitter
Type: Frequency Hopping, Spread Spectrum (FHSS)
Transmit Power: 100mW burst
Modes: Momentary or Latch
Type: Gaussian filtered FSK, TDMA
Frequency Stability: 13 ppm
Harmonics/Spurious: Exceeds FCC and ETSI specifications
Receiver
Type: Frequency Hopping, Spread Spectrum (FHSS)
RF Sensitivity: <-90dBm w 10-3 BER
Frequency Stability: 13 ppm
Distortion: <2%
Environmental
32F to +122F
(0C to +50C)
Dimensions
2.25 x 4.5 x 1 in (57.2 x 114.3 x 25.4 mm) (HxWxD)
Weight
7.4 oz (0.21 kg) including battery and pouch