Depth Transducer, fish finders Depth Sounder Waterproof Dash Depth Finder Transducer with White Backlight for Yachts Boats

Spec:
Item Type: Depth Sounder
Material: Stainless steel 316L, i fog glass, ABS
Mounting Hole Diameter: Approx. Φ52mm/2in
Depth Indication Range: 0-100m/0-328FT
Backlight Color: White
Operating Voltage: DC 12V
Instaneous Voltage: DC 9-32V, up to 36v
Operating Current: 60mA
Operating Temperature: -30 °C- + 75 °C
Storage Temperature: -40 °C - + 85 °C
Dial watertight Rating: IP67
Back Cover watertight Rating: IP5
:
A. This device is work with 12V system only, to indicate the depth appointed. Normally, the buzzer beeps once when it was connected correctly then turn on the power
B. Keypad''Mode'': Quick press the keypad''Mode'' to switch SH/DP/KL/ UN Hold the keypad''Mode'' to turn on/off the monitor Short press the keypad''▲''''▼''to set the value required Hold the keypad''▲''''▼''to keep the digital increasing/decreasing fluently.
Parameter: SH: (Low level alarm) Range: 0-0.6-19.9, when the level no more than value(SH) appointed,the symbol flickering and the buzzer beeps all the time. If SH=0 -->No alarm Alarm setting range :0.6-19.9
Range: 1). Unit''M'': 0-99 2). Unit''FT'':0-199 3). Unit''F'': 0-49 If the level exceed the a ppointed value , the buzzer will beeps twice Keel offset (KL):
Range: 1). Unit''M'': 0-6.0 2). Unit''FT'':0-19.9 3). Unit''F'':0-3.3

How to Use:
Step 1: Open a 52mm diameter circular hole in your center control or other pre installed positionStep 2: Put the instrument into the open round holeStep 3: Correspond the bracket screw hole to the screw on the back of the instrument, then tighten it with the screw and clamp the panel with the bracket and the watch frameStep 4: Plug the power harness directly into the back terminal of the instrument, and then connect the corresponding sensor and wiring harness according to the distribution instructions to connect the power supplyWiring Method: Red wiring is connected to the positive electrode

• CONVENIENT AND PRACTICAL: Our Depth Sounder is a highly practical measuring instrument. It operates on a voltage range of 9-32V, with a maximum voltage of 36V during . It consumes low power, ensuring a long service life. The device offers high test accuracy and a short start-up time. With a maximum depth indication of 100m, it provides quick and accurate information about underwater depth, helping you navigate with confidence.
• EXQUISITE CRAFTSMANSHIP: The Depth Sounder for Boats is crafted with and quality. It features a stainless steel 316L bezel and i fog glass, guareeing excellent i fog and properties. Even in cold sea environments, this gauge can withstand the conditions and deliver consistent performance for an extended period.
• MULTIPLE MODES: Our Marine Depth Display is equipped with various modes to enhance functionality. By pressing the keypad Mode, you can effortlessly switch between SH, DP, KL, and UN functions. This allows for versatile display options and customization. Adjusting the settings is easy – simply short press to set the desired value and experience a digital increase or decrease.
• HIGHLY PRACTICAL: The Depth Transducer is designed to be extremely practical in various marine settings. With a working voltage range of 9-32V and a maximum voltage of 36V, it operates within a low power consumption range. It has a long lifespan and offers high accuracy in measuring depth. The device has a quick start-up time, providing inst and reliable information about the depth of the water.
• FUNCTIONAL AND CONVENIENT: Our Depth Sounder operates efficiently under normal conditions. When properly connected, the device emits a single beep to indicate successful connection before powering on. The Mode button allows you to switch between SH, DP, KL, and UN functions. It also serves as a power switch for the monitor. Short presses enable you to set the desired value easily, and the numbers increase or decrease steadily for a seamless user experience.