Dickinson Marine Newport Explorer Propane Fireplace Heater

Product Description 

The Newport Explorer Propane Fireplace Heater is approved for RV, cabin and marine installations. This heater comes with a wall mounting plate, 28" of chimney for venting the exhaust and providing the heater with fresh air and the chimney fitting & cap. All that is needed is a propane hose, a low pressure regulator and fittings to connect to your lpg tank.

• Large Fireplace Window
• Flame Out Shut-Off
• No Moisture Inside
• Quiet Blower Fan
• Use Up To 5000FT
• 4700 BTU Output
• CSA Approved

Specifications:

HEIGHT: 17"
WIDTH: 10.75"
DEPTH: 8.25"
MIN FLUE: 21"
MAX FLUE: 26"
WALL LINER: 24.75" x 10.25"
ELEC DRAW: 12 V and 0.4 AMPS
BLOWER FAN: 67 CFM
IGNITION: AA Battery
FUEL: Propane
PRESSURE: 11" WC
MAX CAPACITY: 230 Sq. Ft.
BTU: 4700
ALTITUDE: Up to 5000ft
CLEARANCES: 21" Above, 6" Below, 2" Sides

Features

Dual Hot Air Venting:

Both the top of the heater and the hot air vent will discharge hot air. With the blower fan off heat will emit from the top grill, and with fan on, heat will blow from the vent above the window.

Heat Isolating Body:

The outer panels of the heater are configured to not conduct heat from the firebox within, minimizing burn risks from the outside of the appliance.

Push Button Lighting:

Pressing the button on the right side of the heater will activate the sparker inside the heater, quickly igniting the burner.