Fram PH6065B Extra Guard® Motorcycle Oil Filter

Engineered for conventional motor oil. Cellulose and glass blended media provides protection for oil change intervals up to 5,000 miles1. 95% filtration efficiency2. Filtering media keeps the engine oil clean while maintaining optimal flow levels. High quality materials & construction keep your motorcycle or atv running at its best.

• PH6065B
• Motorcycle oil filter
• Designed for flow rates consistent with oe requirements
• Filtering media keeps the engine oil clean while maintaining optimal flow levels
• High quality materials & construction keep your motorcycle or atv running at its best.

Technology:

• With an ideal balance of dirt-trapping efficiency and dirt-holding capacity, fram extra guard oil filters use a special blend of fibers and resin to create a proprietary filter media that delivers excellent engine protection
• Extra guard is the perfect filter for everyday drivers who perform frequent maintenance on their vehicles

Installation Instructions:

• Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot
• Place a drain pan under the oil filter and unscrew oil filter
• Clean mounting base making sure the "o" ring from the old filter is not stuck to the filter mount
• Apply film of clean oil to filter gasket. Do not use grease
• Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers
• Check owner's manual for correct oil specification, viscosity and amount
• Add oil to "full" on dipstick. Idle engine for five minutes and check for leaks
• Shut off engine and recheck oil level after 5 minutes and top off as necessary.