Minwax 244444444 Water Based Polycrylic Protective Finish, 1/2 Pt

Polycrylic Protective Finish is a crystal clear, ultra fast-drying protective topcoat. Protects and adds beauty to interior wood surfaces including woodwork, furniture, doors and cabinets. Crystal clear finish is ideal for use over light woods like maple, ash and birch as well as over Minwax Water Based Wood Stains. Dries quickly. Cleans up easily with warm water.

• Size: 1/2 Pt
  
• Protects and adds beauty to interior wood surfaces including woodwork, furniture, doors and cabinets
• Crystal clear finish is ideal for use over light woods like maple, ash and birch as well as over
• Minwax Water Based Wood Stains
• Dries quickly
• Cleans up easily with warm water.

Specifications:

• Sheens: Semi-gloss
  
• Application Tool: Synthetic bristle brush
• Location: Interior wood surfaces
• Recoat: After 2 hours
• Dry Time: 3 hours for light handling, 24 hours for normal use
• Cleanup: Soap and warm water
• Coverage: 125 sq. ft. per quart
• Coats: 2-3
• VOC Content: Maximum VOC of 275 g/L.

Recommended Uses:

• Woodwork, furniture, cabinets, doors, not recommended for floors.

Directions:

• Surface must be dry and free of wax, grease, polish, old finishes in poor condition or any foreign matter
• Sand to a smooth, uniform surface. DO NOT USE STEEL WOOL. Remove dust with a cloth dampened with water or mineral spirits. Let dry completely
• If desired, apply Minwaxr Wood FinishT or Minwaxr Water Based Wood Stain to unfinished interior wood surfaces following label directions. Wait at least 24 hours before applying Polycrylicr over Minwaxr Wood FinishT
• Stir well before and regularly during use. DO NOT SHAKE. FINISH APPEARS MILKY IN CAN BUT DRIES CRYSTAL CLEAR
• Apply a thin coat of Polycrylicr with a high-quality synthetic bristle brush. Apply in one direction with the grain. Do not overbrush
• Let dry at least 2 hours then sand with very fine sandpaper (220 grit) to ensure an even finish and proper adhesion of additional coats. Do not use steel wool. Remove all dust
• Apply second coat. For additional coats, repeat Step 6 before applying. Three coats are recommended
• After final coat, allow 3 hours before light handling and 24 hours before normal use.