Mishimoto Ford F-150 3.5L EcoBoost Performance Intercooler Kit, 2017+

Mishimoto has developed a direct-fit 2017+ 3.5L F-150 EcoBoost Intercooler & Pipe kit that allows owners to maximize the performance potential of their F-150 or second-gen Raptor. 

Our kit replaces the weak and unattractive plastic piping with free-flowing, durable aluminum piping and silicone boots with DuraCore" technology. The larger volume of our pipes allows your 2017+ 3.5L EcoBoost to breathe free and make the most of its two turbochargers. DuraCore" boots coupled with constant-tension worm gear clamps provide superior strength and blowout resistance, ensuring boost always makes it to its destination. 

Combine our piping with the Mishimoto 2015+ F-150 EcoBoost Intercooler to unleash everything the twin-turbo 3.5L EcoBoost engine is capable of. Our intercooler increases core volume by 77% over stock and external fin surface area by 163%. With cast end tanks and a bar-and-plate construction, our intercooler combines strength and power for an all-around upgrade over stock.

• Direct fit for 2017+ Ford F-150 3.5L EcoBoost
• Increased intercooler pipe volume allows for better flow and power potential
• Cold-side pipe includes CNC quick-disconnect with pre-installed O-ring and spring clip for quick and easy installation
• Additional port on cold-side pipe can be drilled and tapped for methanol injection or sensors
• Includes Mishimoto Silicone Boots with DuraCore" technology for superior resistance to heat, pressure, fuel, and oil
• Constant-tension worm gear clamps keep a strong grip as pipes and boots expand and contract
• 10°F (5.5°C) reduction in intake air temp
• 77% increase in intercooler internal core volume
• 163% increase in external fin surface area
• All-aluminum, TIG-welded construction

Specification

Installation Torque Specs: 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).
Purchase Includes
(1) Mishimoto Intercooler w/ Assembled Rubber Trim
(1) Bypass Valve Bracket
(1) Aluminum Cold-Side Intercooler Pipe w/ CNC Quick-Disconnect Flange
(1) Aluminum Cold-Side Intercooler Pipe w/ CNC IAT Sensor Housing
(4) Aluminum Hot-Side Intercooler Pipes
(8) Silicone Boots w/ DuraCore" Technology
(16) Constant-Tension Worm Gear Clamps
Mounting Hardware
Bypass Valve Hardware
Core Thickness: 4.7"
Engine Codes: 3.5L EcoBoost
Fits:
2017+ Ford F-150 3.5L EcoBoost
2017+ Ford Raptor 3.5L EcoBoost
Coating: Powder Coated
Tank Wall Thickness: 0.157"
Max Rec. PSI: 50 psi
Outlet: 3.0"
Core Length: 19.6"
Core Height: 9.4"
Inlet: 2.5"
Overall Width: 7"
Overall Height: 9.5"
Overall Length: 29"
Construction: Bar-and-plate

Vehicle Fitments: