Seco-Larm E-964-S50TB Mini Single Photobeam Sensor, 50ft
4.1 (65 items)
Limited Time Sale$11.37 cheaper than the new price!!
Free cash-on-delivery fees for purchases over $99
Product details
| Management number | 205069893 | Release Date | 2025/10/16 | List Price | $17.05 | Model Number | 205069893 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
The E-964-S50TB is a simple, easy-to-use, and easy-to-install single-beam infrared motion sensor with 4 selectable frequencies. The device easily installs almost anywhere to provide an invisible beam that, when broken, sends a signal to activate a light, beeper, or other devices. This makes the device perfect for use as part of an access control system, a door or window monitor, a retail store customer alert, or many other places where the user needs to know that someone has entered a specific room or building or other protected areas. The E-964-S50TB is weather-proof, and comes with a built-in AGC control circuit that helps to filter out possible disturbance caused by local lighting conditions.
- 4 selectable frequencies to reduce interference
- Up to 50ft (15m) sensing distance
- Small size for a less conspicuous installation
- Simple to install
- Built-in AGC control to filter out lighting disturbances
- Signal strength indicator for easier alignment
- LED indicators for power, signal strength, and trigger
- Weatherproof for outdoor as well as indoor use (IP65)
- Mounting hardware included
Specifications
| Type | IR Multi-Frequency Single Beam Sensor |
| Current Draw | Transmitter- 15mA@12VDC, Receiver- 30mA@12VDC |
| Number of Beam Frequencies | 4 |
| Number of Beams | 1 |
| Sensing Range | Up to 50ft (15m) |
| Infrared LED Wavelength | 940nm |
| Operating Voltage | 10~24VDC |
| Interupt Speed | 50ms |
| LED Beam Spread Angle | Approximately ±10° |
| LEDs – Red | Indicates transmitter and receiver are not aligned or beam is broken (Alarm) |
| LEDs – Yellow | Dims/off when receiver’s signal is weak / off when beam is broken |
| LEDs – Green | Indicates connected to power |
| Output | NO/NC relay (set by jumper, default is N.C.) 0.5A@30VAC/VDC |
| Operating Humidity | 0~95% |
| Operating Temperature | -13°~131°F (-25°~55°C) |
| Dimensions | 3-11/16″ x 2-3/8″ x 1-13/16″ (94 x 60 x 46 mm) |
| Weight | 2.6-oz (74g) |
| Enclosure | Weatherproof IP65 |
Troubleshooting
| Sensor does not detect the object |
|
| Green power LED does not turn on |
|
| Yellow LED or Red LED does not turn off |
|
| Red LED lights when object is detected, but the output device is not activated |
|
Access Control Accessories
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form