New Arrivals/Restock

Put Trident's Corrugated Marine Wet Exhaust Hose 252 Series to work on your boat for longer connections that require tight bends on wet exhaust systems. Trident 252 Wet Exhaust Hose sports a color coded bright blue stripe for easy identification. The hose size and description are marked continuously in bold white letters.

• Meets SAE J2006
• Temperature Range: 200 Deg. continuous - 250 Deg. intermittent
• Use for longer connection which requires a very tight bend on marine wet exhaust systems
• Meets or exceeds USCG and ABYC requirement for type certified wet exhaust service
• Formulated to resist engine heat, exhaust fumes and ozone
• Corrugated construction with double helical wires imbedded between tough rayon spiral cord piles for tight bend radius
• Bend Radius for 3" & smaller hose is 2 x ID = approximate bend radius and for over 3" is 6 x ID = approximate bend radius

Trident recommends double clamping with 1/2" or larger S/S clamps spaced at least one clamp width apart at a minimum of 1" from end of pipe and at least one clamp width from end of hose.

NOTES:

1. Sold by the indicated units:
   • For sold by the foot hose enter number of feet or sections desired in the Qty. box (up to the max length)
   • For 12-1/2' sections enter the number of desired pieces
2. Maximum length is 12-1/2'
3. 8ft length is maximum length that can ship by UPS shipping
4. Cut hoses are custom items and Not Returnable

Large quantities and large diameter hose may require a freight quote due to shipping restrictions. Our Shipping Department will contact you if there are any shipping issues.