New Arrivals/Restock

Johnson Pump's Viking Power 16 is a compact shower, drain, bilge and waste water pump with 4.2 GPM flow rate sized to allow installation in tight spaces. The Viking Power 16 shower drain pump can be incorporated into a small boat wastewater system in several different pump/motor configurations.

• Compact, robust and adaptable so it can be mounted virtually anywhere on board
• Includes KlickTite XL connectors fitted as standard, making hose connections a snap!
• Ultra-modern, single-chamber, self-priming diaphragm pump that can be set up in several different pump/motor configurations
• Can be run dry and can pump air/water mixture
• Easy to install anywhere after the drain outlet in the wastewater system or as a bilge pump
• Non-choke valves mean that no in-line filters are necessary, and the pump can not only be run dry, it can also handle a mixture of air and water without difficulty
• Self-priming up to a height of 3 meters
• Low pulse and muffled rubber bracket, this pump offers quiet operation
• Complies with ISO 15083 and small craft bilge pump standard for vessels up to 12 m (39.4 ft)
• High-impact glass-fiber reinforced nylon body
• Ball-bearing supported transmission
• Non-choke valves - no filters required

The Viking Power 16 is specifically designed to pump wastewater, built to last, and engineered for easy maintenance. When it comes time to replace the premium grade reinforced Nitrile rubber diaphragm, you can put in a spare without even removing the pump from the system. Delivered with 1" hose and 3/4" hose 1/2" BSP KlickTite XL connectors. (90 Degree KlickTite XL connectors available as extra accessory.)

Technical specifications:

• Capacity: 16 l/min (4.2 GPM) open flow (15 l/min at 0.1 bar)
• Max. head: 3 meters (9.8 feet)
• Max. lift: 3 meters (9.8 feet)
• Dimensions: 186 mm long x 235/181 mm wide x 118/204 mm high
• 7.3" x 9.3"/7.1" x 4.6/8"
• Connection: KlickTite XL connectors for 1" hose or 3/4" hose and
• 12" BSP threads; straight and 90 Deg. (optional)
• Weight: 2.6 kg (5.7 pounds)
• Motor: 2.3 amp (12 volt), 1.2 amp (24 volt) at 0.1 bar
• 12/24 volt DC (with built-in thermal protection)
• Body: Nylon, glass-fiber reinforced
• Valves: Nitrile rubber
• Diaphragm: Reinforced Nitrile rubber

Spare parts:

• 09-47116 Straight 3/4" hose
• 09-47117 Straight 1" hose
• 09-47118 90 Deg. 3/4" hose
• 09-47119 90 Deg. 1" hose
• Grey Water Tank: Order no: 09-13384